0BN01-00816 Avibulb Rivets

Avdel® Avibulb® Structural Blind Rivet, Unit of Measure: Inch, 1/4 Inch Diameter, 0.250 Inch Decimal Equivalent, 6.35mm Nominal Metric Diameter, 0.059 Inch (1.50mm) Minimum Grip, 0.217 Inch (5.51mm) Maximum Grip, 0.059 - 0.217 Inch (1.49 - 5.51mm) Grip Range, Dome Head, Steel Body Material, Material Detail: Low Carbon Steel SAE 1015, DIN 1711, RSt 38-2, Werkstoff 1.0401, Zinc Clear Body Finish, Finish Detail: Zinc Clear Trivalent Passivated, Steel Mandrel Material, Zinc Clear Trivalent Passivated Mandrel Finish, 0.260 Inch (6.60mm) Minimum Hole Size, 0.276 Inch (7.01mm) Maximum Hole Size, G Drill Size, 0.528 Inch (13.41mm) Head Diameter, 0.122 Inch (3.10mm) Head Height, 0.681 Inch (17.30mm) Body Length, 0.192 Inch (4.87mm) Mandrel Diameter, 2495 lbf. (11.10kN) Shear Strength, 1528 lbf. (6.80kN) Tensile Strength, RoHS 3 Compliant Yes

- All fastener orders are supplied with Certificates of Conformance with packing lists. Additional Documentation such as material test reports may be available upon request (some at an additional charge). Please include your request in the "Order Note" section when submitting your order online. Click here for Quality Assurance & Compliance Documents.

The new Avdel® Avibulb® XT is a high strength breakstem fastener with excellent bulbing tail formation, which makes it ideal for the use in thin sheet materials. Avibulb® XT structural fasteners feature multi-grip capability, especially suited for applications with varying sheet thicknesses. They also have the advantage of good hole fill compensating for irregular, oversized or misaligned holes. As a multi-grip fastener, the Avibulb® XT rivet has the capability to join component parts having a broad range of thicknesses, thus reducing inventory where a variety of rivet sizes might otherwise be necessary. During the rivet placing sequence the tail of the rivet body collapses into a bulb shape against the rear sheet. This creates a load bearing surface, which absorbs the force of setting the rivet. Otherwise the setting force, or clamp load, could spread into the application material and might damage the material. This makes Avibulb® ideal for use in thin sheet, soft, brittle and low strength materials, as well as resulting in high resistance to pull-out loads. Also during installation, the portion of the rivet body contained within the application thickness expands outwardly toward the wall of the application hole until the hole is completely filled by the rivet material. This radial expansion results in a strong, vibration resistant joint and compensates for irregular, oversized, slotted or misaligned holes. Also, it can stop sheet movement in applications with non-standard holes.

• High shear and tensile strength
• Multi-grip capability
• High residual clamp load
• Resists vibration and joint slippage
• Good blind side footprint and bulb formation
• Spreads the tail bearing load/clamp on the rear sheet
• Suitable also in softer materials
• Reliable stem retention
• Under head recess accommodates burrs around holes and spreads the load evenly on the top sheet

• Overview