0BN01-06010 Avibulb Rivets

Avdel® Avibulb® Blind Rivet, Unit of Measure: Inch, 1/4 Inch Diameter, 0.250 Inch Decimal Equivalent, 6.35mm Nominal Metric Diameter, 0.059 Inch (1.50mm) Minimum Grip, 0.157 Inch (3.99mm) Maximum Grip, 0.059 - 0.157 Inch (1.49 - 3.99mm) Grip Range, Dome Head, Steel Body Material, Material Detail: Low Carbon Steel BS3111 Type 0, SAE 1008, DIN 1654, QSt 34-3 / BS3111 Type 0, SAE 1015 DIN 1711, RSt 38-2, Werkstoff 1.0401, Zinc Clear Body Finish, Finish Detail: Zinc Clear Trivalent Passivated, Steel Mandrel Material, Zinc Clear Trivalent Passivated Mandrel Finish, 0.240 Inch (6.10mm) Minimum Hole Size, 0.248 Inch (6.3mm) Maximum Hole Size, #53 Drill Size, 0.484 Inch (12.29mm) Head Diameter, 0.083 Inch (2.11mm) Head Height, 0.551 Inch (13.99mm) Body Length, 0.158 Inch (4.01mm) Mandrel Diameter, 944 lbf. (4.20kN) Shear Strength, 1213 lbf. (5.40kN) Tensile Strength, RoHS 3 Compliant Yes

- All fastener orders are supplied with Certificates of Conformance with packing lists. Additional Documentation such as material test reports may be available upon request (some at an additional charge). Please include your request in the "Order Note" section when submitting your order online. Click here for Quality Assurance & Compliance Documents.

The Avibulb® rivet is a high strength, non-structural breakstem fastener. Steel is the only material choice, but it's available in a variety of sizes from 1/8" to 3/16" including an M6 diameter. Its all steel construction gives the rivet a surprisingly high shear strength, but it's a combination of excellent bulbing tail formation and radial expansion of the rivet body into the application hole that allows the Avibulb® rivet to create an extremely strong joint. During the rivet placing sequence the tail of the rivet body collapses into a bulb shape against the rear sheet. This creates a load bearing surface, which absorbs the force of setting the rivet. Otherwise the setting force, or clamp load, could spread into the application material and might damage the material. This makes Avibulb® ideal for use in thin sheet, soft, brittle and low strength materials, as well as resulting in high resistance to pull-out loads. Also during installation, the portion of the rivet body contained within the application thickness expands outwardly toward the wall of the application hole until the hole is completely filled by the rivet material. This radial expansion results in a strong, vibration resistant joint and compensates for irregular, oversized, slotted or misaligned holes. Also, it can stop sheet movement in applications with non-standard holes. The bulbing and expansion characteristics can only be controlled over a narrow range of material thickness and hole diameter. Therefore, the application hole size and grip range must meet the specified ranges to ensure proper installation and performance of the Avibulb® rivet.

• High shear and tensile strength
• Good hole fill
• Provides a large blind side bearing area against the rear sheet
• Retained stem
• Ideal for applications requiring elevated temperatures
• Spreads the tail bearing load/clamp on the rear sheet
• Ideal for use in thin sheet materials
• Compensates for irregular, oversized, slotted or misaligned holes
• Can stop sheet movement in non-standard holes
• Provides strong, vibration resistant joints
• No damage, electrical problems or rattling due to loose stems

• Overview