Avdel® Klamp-Tite® Blind Rivet, Unit of Measure: Inch, 1/4 Inch Diameter, 0.250 Inch Decimal Equivalent, 6.35mm Nominal Metric Diameter, 0.187 Inch (4.75mm) Minimum Grip, 0.375 Inch (9.53mm) Maximum Grip, 0.187 - 0.375 Inch (4.75 - 9.52mm) Grip Range, Protruding Head, Aluminum Body Material, Material Detail: Aluminum Alloy 5056, Plain Body Finish, Finish Detail: Plain, Aluminum Alloy 2024/5056 Mandrel Material, Plain Mandrel Finish, 0.252 Inch (6.40mm) Minimum Hole Size, 0.262 Inch (6.65mm) Maximum Hole Size, E Drill Size, 0.560 Inch (14.22mm) Head Diameter, 0.113 Inch (2.87mm) Head Height, 1.167 Inch (29.64mm) Body Length, 0.151 Inch (3.84mm) Mandrel Diameter, 420 lbf. (1.87kN) Shear Strength, 588 lbf. (2.62kN) Tensile Strength, RoHS Compliant Yes
- All fastener orders are supplied with Certificates of Conformance with packing lists. Additional Documentation such as material test reports may be available upon request (some at an additional charge). Please include your request in the "Order Note" section when submitting your order online. Click here for Quality Assurance & Compliance Documents.
The structural Klamp-Tite® rivet is an aluminum alloy, breakstem rivet with a split tail formation where the rivet body collapses into three legs or petals. This unique collapse pattern provides a wider than normal grip range and a larger than normal blind side footprint. The wider than normal grip range provides the capability to join component parts having a broad range of thicknesses, thus reducing inventory where a variety of rivet sizes might otherwise be necessary. The large blind side footprint is often referred to as a large secondary head and creates a load bearing surface which absorbs the force of setting the rivet. Otherwise the setting force, or clamp load, could accumulate in the application material and might damage the material. The design and fashion in which the rivet body collapses prevents any radial expansion of the rivet into the application hole - another safeguard against damage to the application material. The combination of large blind side bearing surface and lack of radial expansion makes Klamp-Tite® ideal when application materials are so soft or brittle that the tensile force exerted by a conventional rivet would cause damage. This typically includes thin sheet, soft, brittle and low strength materials.
- Spreads the tail bearing load/clamp on the rear sheet
- Ideal for use in thin sheet materials offering high resistance to pull-out loads
- Multi-grip capability accommodates wide variations in material thickness
- Ideal for use in very soft or brittle materials
- Stem is mechanically locked into body providing very strong, vibration resistant joints
- Visible lock for quick and easy inspection
- Optional underhead washer provides a weather-proof seal