09504-00811 Nutsert Threaded Inserts (Avdel)

Avdel® Nutsert® Round Body Splined Nutsert Insert, Unit of Measure: Inch, 3/8 Inch Diameter, 0.375 Inch Decimal Equivalent, 9.53mm Nominal Metric Diameter, Thread Size: 1/4-20 UNC-2B, 0.030 - 10.000 Inch (0.76 - 254.00mm) Grip Range, Low Profile Head, Body End: Open End, Stainless Steel Body Material, Material Detail: Stainless Steel 304, Passivated Body Finish, Finish Detail: Passivated per QQ-P-35 Type II or ASTM A-380, RoHS 3 Compliant Yes, Minimum Hole Depth: 0.540 Inch (13.72mm), 0.375 Inch (9.53mm) Head Diameter, 0.525 Inch (13.33mm) Body Length, Set Body Length: 0.275 Inch (6.99mm), Material Thickness Range: 0.030 Inch - Up (0.76mm - Up), Hole Size of Material Thickness 0.030 - 0.090 Inch (0.76 - 2.29mm): 0.375 Inch (9.53mm), Drill Size of Material Thickness 0.030 - 0.090 Inch (0.76 - 2.29mm): 3/8 Inch, Hole Size of Material Thickness 0.091 - 0.124 Inch (2.31 - 3.15mm): 0.375 Inch (9.53mm), Drill Size of Material Thickness 0.091 - 0.124 Inch (2.31 - 3.15mm): 3/8 Inch, Hole Size of Material Thickness 0.125 - 0.186 Inch (3.18 - 4.72mm): 0.386 Inch (9.80mm), Drill Size of Material Thickness 0.125 - 0.186 Inch (3.18 - 4.72mm): W, Hole Size of Material Thickness 0.187 - Up Inch (4.75 - Up): 0.391 Inch (9.93mm), Drill Size of Material Thickness 0.187 - Up Inch (4.75 - Up): 25/64 Inch

- All fastener orders are supplied with Certificates of Conformance with packing lists. Additional Documentation such as material test reports may be available upon request (some at an additional charge). Please include your request in the "Order Note" section when submitting your order online. Click here for Quality Assurance & Compliance Documents.

The Nutsert® threaded insert is a steel, low profile, expanding insert available in standard and metric thread sizes. An expanding insert is a single piece, which breaks into two pieces during installation. The lower threaded section of the insert draws up inside the upper sleeve section, causing the sleeve to expand 360o thus swaging the insert into the hole. Because the insert does not form a bubble on the backside of the application, an expanding insert can be used in blind hole applications. However, an expanding insert has less resistance to push out forces than a bubbling insert, which collapses into a bubble formation on the backside of the application. The low profile flange of the Nutsert® insert results in near flush installation and clamp up making it ideal for flush fitting, thin sheet and low load bearing applications. Additionally, the Nutsert® insert has small splines under the flange, which play a small role in the inserts resistance to turning in the application hole.

• Splined body improves torque-to-turn by up to 50% compared to plain body inserts
• Improved electrical continuity in sheet metal fixings
• Expanding style insert body can be used in any material thickness from 0.030 Inch through solid materials
• Radial expansion of Nutsert® provides 360° contact with parent material
• Allows installation anywhere and at any time in the assembly process
• Reduced rear-sheet protrusion
• Low profile head results in near flush installation and clamp up