TAPD20M4BS Pop Micro Rivets

Pop Micro Rivets, TAPD20M4BS Blind Rivets, Unit of Measure: Inch, 1/8 Inch Diameter, 0.1250 Inch Decimal Equivalent, 3.175 Inch Nominal Metric Diameter, .251 Inch (6.37mm) Minimum Grip, .343 Inch (8.71mm) Maximum Grip, 5.51-5.51 Inch(.217-.236mm) Grip Range, Dome Head, Aluminum Body Material, Material Detail: Aluminium 5154, Plain Body Finish, Finish Detail: Steel, Steel Mandrel Material, Coated Mandrel Finish, .138 Inch (3.50mm) Minimum Hole Size, .084 Inch (2.13mm) Maximum Hole Size, #45 Drill Size, .149 Inch (9.53mm) Head Diameter, .051 Inch (1.30mm) Head Height, .224 Inch (5.70mm) Body Length, 0.114 Inch (2.90mm) Mandrel Diameter, 180lbf. (.800kN) Shear Strength, 157lbf. (.700kN) Tensile Strength, RoHS Compliant Yes

- All fastener orders are supplied with Certificates of Conformance with packing lists. Additional Documentation such as material test reports may be available upon request (some at an additional charge). Please include your request in the "Order Note" section when submitting your order online. Click here for Quality Assurance & Compliance Documents.

POP Micro Rivets are designed with printed circuit board manufacturers and assemblers in mind. Micro Rivets are some of the smallest blind breakstem rivets available. Wherever space is a consideration, these rivets are excellent fastener choices. Micro Rivets are inserted and set from one side of the work piece. They deliver low in-place cost and fast assembly. Correct setting pressure is predetermined by the rivet design so sets are uniform and independent of operator judgments or tool torque. They are not subject to strip-out and will not deform work pieces.

• Extremely small rivet ideal for thin sheet metal and printed circuit boards
• Very low secondary side, excellent in tight quarters
• Low head height terrific where space Is at a premium
• Ideal for electronics applications