09655-00600 TSN Threaded Inserts

Avdel® TSN® "O" Style Round Body Rivetnut Insert, Unit of Measure: Inch, 0.249 Inch Decimal Equivalent, 6.33mm Nominal Metric Diameter, Thread Size: #6-32 UNC-2B, 0.020 Inch (0.51mm) Minimum Grip, 0.079 Inch (2.01mm) Maximum Grip, 0.020 - 0.079 Inch (0.51 - 2.01mm) Grip Range, 0.287 Inch (7.29mm) Head Diameter, 0.017 Inch (0.43mm) Head Height, Low Profile Head, 0.250 Inch (6.35mm) Minimum Hole Size, 0.254 Inch (6.45mm) Maximum Hole Size, Body End: Open End, 0.410 Inch (10.41mm) Body Length, Set Body Length: 0.315 Inch (8.00mm), Installed Thread Depth: N/A, Steel Body Material, Material Detail: Steel 1008/1010, Zinc Clear Trivalent Chromate Body Finish, Finish Detail: Zinc Clear Trivalent Chromate per ASTM B-633 Type I, Class 2, RoHS 3 Compliant Yes

- All fastener orders are supplied with Certificates of Conformance with packing lists. Additional Documentation such as material test reports may be available upon request (some at an additional charge). Please include your request in the "Order Note" section when submitting your order online. Click here for Quality Assurance & Compliance Documents.

The TSN® threaded insert is a low profile, plain bodied, bubbling insert in aluminum or steel construction offered in a wide variety of standard and metric thread sizes. Bubbling means that during the installation process, the insert collapses into a bubble shape on the backside of the application material. The application material is clamped between the flange of the insert and the bubble shape resulting in high resistance to pull-out loads. Because the insert forms a bubble on the backside of the application, the TSN® insert cannot be used in blind hole applications. The bubble also serves as a load bearing surface, which absorbs the force of setting the insert. Otherwise the setting force, or clamp load, could spread into the application material and might damage the material. This makes the TSN® insert ideal for use in thin sheet, soft, brittle and low strength materials. The low profile flange of the TSN® insert results in near flush installation and clamp up making it ideal for flush fitting, thin sheet and low load bearing applications.

• Can be used in very thin sheet materials from 0.50mm (0.02")
• Various platings available to increase the corrosion resistance
• Can be used with hand tools, pneumatic tools and fully automated machines to suit a wide range of assembly methods
• Access needed from only one side of the application, for high speed assembly
• Low profile head allows near flush fit to application