BAPKTR-06W-12 Klamp-Tite (Structural) Rivets

Avdel® Klamp-Tite® Blind Rivet, Unit of Measure: Inch, 3/16 Inch Diameter, 0.187 Inch Decimal Equivalent, 4.75mm Nominal Metric Diameter, 0.562 Inch (14.27mm) Minimum Grip, 0.750 Inch (19.05mm) Maximum Grip, 0.562 - 0.750 Inch (14.27 - 19.05mm) Grip Range, Protruding Head, Aluminum Body Material, Material Detail: Aluminum Alloy 5056, Wax Lubricated Body Finish, Finish Detail: Wax Lubricated, Aluminum Mandrel Material, Wax Lubricated Mandrel Finish, 0.204 Inch (5.18mm) Minimum Hole Size, 0.209 Inch (5.31mm) Maximum Hole Size, #5 Drill Size, 0.445 Inch (11.30mm) Head Diameter, 0.088 Inch (2.23mm) Head Height, 1.130 Inch (28.70mm) Body Length, Overall Body Length Including Mandrel: 1.440 Inch (36.57mm), 0.103 Inch (2.61mm) Mandrel Diameter, 700 lbf. (3.11kN) Shear Strength, 450 lbf. (2.00kN) Tensile Strength, RoHS 3 Compliant YesAvdel® Klamp-Tite® Blind Rivet, Unit of Measure: Inch, 3/16 Inch Diameter, 0.187 Inch Decimal Equivalent, 4.75mm Nominal Metric Diameter, 0.562 Inch (14.27mm) Minimum Grip, 0.750 Inch (19.05mm) Maximum Grip, 0.562 - 0.750 Inch (14.27 - 19.05mm) Grip Range, Protruding Head, Aluminum Body Material, Material Detail: Aluminum Alloy 5056, Wax Lubricated Body Finish, Finish Detail: Wax Lubricated, Aluminum Alloy 7075 Mandrel Material, Wax Lubricated Mandrel Finish, 0.204 Inch (5.18mm) Minimum Hole Size, 0.209 Inch (5.31mm) Maximum Hole Size, #6 Drill Size, 0.445 Inch (11.30mm) Head Diameter, 0.088 Inch (2.24mm) Head Height, 1.440 Inch (36.58mm) Body Length, 0.103 Inch (2.62mm) Mandrel Diameter, 700 lbf. (3.11kN) Shear Strength, 450 lbf. (2.00kN) Tensile Strength, RoHS Compliant Yes

The structural Klamp-Tite® rivet is an aluminum alloy, breakstem rivet with a split tail formation where the rivet body collapses into three legs or petals. This unique collapse pattern provides a wider than normal grip range and a larger than normal blind side footprint. The wider than normal grip range provides the capability to join component parts having a broad range of thicknesses, thus reducing inventory where a variety of rivet sizes might otherwise be necessary. The large blind side footprint is often referred to as a large secondary head and creates a load bearing surface which absorbs the force of setting the rivet. Otherwise the setting force, or clamp load, could accumulate in the application material and might damage the material. The design and fashion in which the rivet body collapses prevents any radial expansion of the rivet into the application hole - another safeguard against damage to the application material. The combination of large blind side bearing surface and lack of radial expansion makes Klamp-Tite® ideal when application materials are so soft or brittle that the tensile force exerted by a conventional rivet would cause damage. This typically includes thin sheet, soft, brittle and low strength materials.

• Spreads the tail bearing load/clamp on the rear sheet
• Ideal for use in thin sheet materials offering high resistance to pull-out loads
• Multi-grip capability accommodates wide variations in material thickness
• Ideal for use in very soft or brittle materials
• Stem is mechanically locked into body providing very strong, vibration resistant joints
• Visible lock for quick and easy inspection
• Optional underhead washer provides a weather-proof seal

• Overview