0BE61-00614 Avinox Rivets

Avdel® Avinox® Multi-Grip Blind Rivet, Unit of Measure: Inch, 3/16 Inch Diameter, 0.187 Inch Decimal Equivalent, 4.75mm Nominal Metric Diameter, 0.138 Inch (3.51mm) Minimum Grip, 0.236 Inch (5.99mm) Maximum Grip, 0.138 - 0.236 Inch (3.50 - 5.99mm) Grip Range, Dome Head, Stainless Steel Body Material, Material Detail: Stainless Steel, Bright Body Finish, Finish Detail: Polished, Stainless Steel Mandrel Material, Plain Mandrel Finish, 0.193 Inch (4.90mm) Minimum Hole Size, 0.201 Inch (5.11mm) Maximum Hole Size, #10 Drill Size, 0.378 Inch (9.60mm) Head Diameter, 0.059 Inch (1.50mm) Head Height, 0.610 Inch (15.49mm) Body Length, 0.126 Inch (3.20mm) Mandrel Diameter, 1236 lbf. (5.50kN) Shear Strength, 1124 lbf. (5.00kN) Tensile Strength, RoHS 3 Compliant Yes

- All fastener orders are supplied with Certificates of Conformance with packing lists. Additional Documentation such as material test reports may be available upon request (some at an additional charge). Please include your request in the "Order Note" section when submitting your order online. Click here for Quality Assurance & Compliance Documents.

The Avinox® rivet is a high strength, non-structural breakstem fastener. Stainless steel is the only material choice, but it's available in 3 sizes - 1/8", 5/32" and 3/16". Stainless steel gives the rivet a high shear and tensile strength and also provides high corrosion resistance. Mechanically, a combination of excellent bulbing tail formation and radial expansion of the rivet body into the application hole allows the Avinox® rivet to create an extremely strong joint. During the rivet placing sequence the tail of the rivet body collapses into a bulb shape against the rear sheet. This creates a load bearing surface, which absorbs the force of setting the rivet. Otherwise the setting force, or clamp load, could spread into the application material and might damage the material. This makes Avinox® ideal for use in thin sheet, soft, brittle and low strength materials, as well as resulting in high resistance to pull-out loads. Also during installation, the portion of the rivet body contained within the application thickness expands outwardly toward the wall of the application hole until the hole is completely filled by the rivet material. This radial expansion results in a strong, vibration resistant joint and compensates for irregular, oversized, slotted or misaligned holes. Also, it can stop sheet movement in applications with non-standard holes. The bulbing and expansion characteristics can only be controlled over a narrow range of material thickness and hole diameter. Therefore, the application hole size and grip range must meet the specified ranges to ensure proper installation and performance of the Avinox® rivet.

• High corrosion resistance
• High shear and tensile strength
• Good hole fill
• Provides a large blind side bearing area against the rear sheet
• Retained stemIdeal for applications requiring elevated temperatures
• Spreads the tail bearing load/clamp load on the rear sheet
• Ideal for use in thin sheet materials
• Compensates for irregular, oversized, slotted or misaligned holes
• Can stop sheet movement in non-standard holes
• Provides strong, vibration resistant joints
• No damage, electrical problems or rattling due to loose stems

• Overview