74201-12000 Tools (Avdel)

Stanley Engineered Fastening

Avdel® Threaded Insert Power Tool, 0.276 Inch (7.01mm) Stroke, Air Pressure 75 - 100 psi (5.17 - 6.89 bar), 0.26 Cu-ft at 75 psi Free Air Volume Required, 3967lb. at 75 psi (17.65kN at 5.17 bar) Pull Force, Approximately 2.5 sec Cycle Time, <75dB(A) Noise Level, <8.2 ft/s2 Vibration, Hydraulic Oil & Air Power Supply, 2000 RPM (Spin On), 2000 RPM (Spin Off) Motor Speed, Weight 4.63lb. (2.10kg) With Nose Equipment

The 74201 hydro-pneumatic tool is designed for placing Avdel® threaded inserts and is ideal for batch or flow-line assembly in a wide variety of applications throughout all industries. The tool works on the principle of adjustment of the force rather than the stroke. The advantage lies in the fact that it is possible to place the same insert (of the specified tightening thickness) in materials of different thicknesses, after setting the tool for the greatest thickness.

• Lightweight and ergonomically designed
• One-step trigger
• Spin-on, pull-up, spin-off action
• Can be suspended or hand-held
• Hydro-pneumatic operation
• Heavy duty plastic body
• Adjustments made for force required to collapse the insert allowing placement of the same insert in materials of different thicknesses
• Ideal for applications with varying sheet thicknesses, without any adjustment to stroke
• Overcomes rear sheet swarf issues
• Reduced operator fatigue
• Increased impact resistance, durability and structural integrity
• Ensures accurate and secure thread installation
• Pressure setting
• Plastic covered cast aluminium body
• Heavy duty rubber base
• Steel tie rods
• Increased productivity