01604-00615 Avex Rivets

Avdel® Avex® Multi-Grip Blind Rivet, Unit of Measure: Inch, 3/16 Inch Diameter, 0.187 Inch Decimal Equivalent, 4.75mm Nominal Metric Diameter, 0.125 Inch (3.18mm) Minimum Grip, 0.312 Inch (7.92mm) Maximum Grip, 0.125 - 0.312 Inch (3.17 - 7.92mm) Grip Range, Countersunk Head, Aluminum Body Material, Material Detail: Aluminium 2.5% Magnesium Alloy, Plain Body Finish, Finish Detail: Plain, Steel Mandrel Material, Zinc Clear Trivalent Mandrel Finish, 0.193 Inch (4.90mm) Minimum Hole Size, 0.198 Inch (5.03mm) Maximum Hole Size, #10 Drill Size, 0.351 Inch (8.92mm) Head Diameter, 0.069 Inch (1.75mm) Head Height, 0.610 Inch (15.49mm) Body Length, 0.112 Inch (2.84mm) Mandrel Diameter, 350 lbf. (1.56kN) Shear Strength, 530 lbf. (2.36kN) Tensile Strength, RoHS 3 Compliant Yes

- All fastener orders are supplied with Certificates of Conformance with packing lists. Additional Documentation such as material test reports may be available upon request (some at an additional charge). Please include your request in the "Order Note" section when submitting your order online. Click here for Quality Assurance & Compliance Documents.

The Avex® rivet is a multi-grip, hole filling, non-structural breakstem rivet with a long and reliable track record in a wide range of applications and industries. Multi-grip means the rivet has the capability to join component parts having a broad range of thicknesses, thus reducing inventory where a variety of rivet sizes might otherwise be necessary. Hole filling means the rivet will expand radially into the application hole to provide a strong, vibration resistant joint and compensate for irregular, oversized, slotted or misaligned holes. Also, it can stop sheet movement in applications with non-standard holes. The Avex® rivet relies on a combination of its hole filling properties along with an excellent bulbing tail formation on the application blind side to create an extremely strong joint. The bulb formation against the rear sheet creates a load bearing surface, which absorbs the force of setting the rivet. Otherwise the setting force, or clamp load, could spread into the application material and might damage the material. This makes Avex® ideal for use in thin sheet, soft, brittle and low strength materials, as well as resulting in high resistance to pull-out loads.

• Multi-grip capability accommodates wide variations inmaterial thickness
• One fastener can be used to replace several standard grip fasteners thus reduced fastener inventory and simpler stock control
• Good hole fill provides strong, vibration resistant joints
• Compensates for irregular, oversized, slotted or misaligned holes
• Can stop sheet movement in non-standard holes
• Retained stem avoids damage, electrical problems or rattling caused by loose stems
• Provides a large blind side bearing area against the rear sheet
• Spreads the tail bearing load/clamp load on the rear sheet making it ideal for use in thin sheet materials