Standard Nutsert Splined

The 360 degree swaged and splined nutsert threaded insert are designed for applications where minimal backside thread protrusion is required. The reduced overall length of the installed Splined Series Insert allows it to be used in limited clearance applications and quality installations even in variable thickness materials are assured by our spin/spin torque install tools. Reduced inventory is possible because one Splined Insert will work in any thickness material above .030/,76 mm. installing into most any material.

---

The Splined 360 degree nutsert threaded insert can be used with Grade 8 Metric Class 12.9 screws due to the high shear load capability and is available in Steel from stock, Aluminum, Brass and Series 304 Stainless are available by special order.

---

It is recommended that the mating part comes in contact with the head of the Splined Insert. If a gap or clearance hole exists between the mating part and the Splined Insert, the threaded nut portion may rotate or pull through the parent material. If a gap or clearance hole exists between the mating part and the Splined Insert, the threaded nut portion may rotate or pull through the parent material.